304 stainless steel Bone cement machine for food processing /
biopharming
Discription:
Application and technology
Bone breaking machine is especially suitable for breaking dry bone,
fresh beef bone, pig bone, sheep bone, donkey bone, and other
animal bones and fish bones, with the crushing range of 5-100 mm.
Sausage, ham sausage, bone soup, raw meat, frozen meat, frozen
meat, frozen meat, frozen flavor, marrow extract, bone meal, bone
glue, chondroitin, bone soup, bone peptide extract, biological
products, instant noodles, puffed food, compound seasoning, food
ingredients, pet food and frozen meat.
(1) Feature Description:
a) Shear type bone breaker is suitable for crushing all kinds of
hard materials;
b) Shear type bone breaker is suitable for coarse grinding of
conventional materials;
c) According to the actual situation of customers, the special gate
device and screen mesh size are designed to meet the requirements
of various material shapes and particle sizes.
(2) Installation and operation instructions:
a) Connect the power supply correctly. Before starting, pull out
the inertia wheel by hand and check whether there are abnormal
sundries in the machine room.
b) Turn on the machine for idling and check whether the cutter
turns correctly. If the direction reverses, please change the
three-phase power line connection sequence. After confirming the
correct direction of the cutter, start idling for 3 minutes, fasten
and send it to the feeding room to make the protection switch fully
contact and meet the crushing conditions, then the material can be
put into production.
c) It is forbidden to put iron and other hard objects into the
crushing chamber.
d) If abnormal sound is found, stop the machine immediately, check
the cause, and restart after troubleshooting.
e) It is recommended that the machinery be installed in a separate
workplace.
(3) Maintenance instructions:
a) The mechanical starting motor should be oriented to the
ventilation position to ensure the heat dissipation of the motor
and prolong the service life of the motor.
b) Check the tool bolt regularly. After using the new machine for a
week, use it as a special tool to tighten the moving bolt to
strengthen the fixation between the blade and the rest.
c) Rolling bearing with seat: grease should be added to the bearing
nozzle every 20 days to ensure the lubricity between rolling
bearings.
d) In order to ensure the sharpness of the cutting edge of the
cutting tool, the moving knife shall be checked regularly according
to the use condition to ensure that the sharp edge of the moving
knife causes unnecessary damage to other parts.
e) Before the second start-up, it is necessary to remove the
remaining debris in the machine room when the material is broken
for the first time, so as to reduce the starting resistance and
motor load. The wheel cover and belt pulley cover should be removed
regularly, and the ash outlet under the flange should be removed.
As the residual powder discharged from the machine room enters into
the rotating bearing.
f) When changing the cutter, keep the gap between the cutter and
the cutter: 0.5-0.8mm.
g) Check whether the belt is loose regularly. If the belt is loose,
loosen the fixing bolt of the motor and use special tools to adjust
the motor outward until the belt is tightened.
Technical specification:
| model | outpur
( kg/h ) | Crushing caliber
( mm ) | voltage
(v) | power
( kw ) | Boundary dimension( mm ) | weight( kg ) |
| PG-180 | 20-60 | 180x200 |
380 | 3 | 800x500x950 | 160 |
| PG-300 | 80-200 | 300 × 230 | 5.5 | 1150 × 750× 1300 | 320 |
| PG-400 | 150-400 | 380 × 250 | 7.5 | 1150 × 850 × 1300 | 350 |
| PG-500 | 200-600 | 500 × 250 | 11 | 1350 × 1000 × 1350 | 600 |
| PG-600 | 300-900 | 600 × 320 | 15 | 1650 × 1200 × 1700 | 800 |
| PG-800 | 800-2200 | 800 × 650 | 22 | 2400 × 1500 × 2400 | 2000 |
| PG-1000 | 1000-4000 | 1000 × 800 | 37 | 2400 × 1800 × 2500 | 2360 |
ATTENTION: If there is any change in product specifications, please notify us
by email, and we can customize it for you.
